SAF-T-EZE Logo
Gasket Sealant
GS#1 GS#2 GS#3 GS#5 Weather-Strip Adhesive


Gasket Sealant GS#1 sets to a hard non-flexible gasket. It is recommended for permanent rigid assemblies. Gasket Sealant GS#2 sets to a semi-flexible gasket. It reliably seals gaskets, flanges, connections and other flexible assemblies.

Gasket Sealant GS#3 dries to a thin flexible film It is particularly recommended for paper and cork gasket applications. Gasket Sealant GS#5 Weather-Strip Adhesive is suitable for all types of weather-stripping applications, and general purpose bonding.

SAF-T-EZE Product Line in pdf  Chart Operating Temperature

Gakset Sealant Application


Gasket Sealant GS#1
Icon Heat  Performs to 400ºF (205ºC)

Characteristic  Data Sheets

Product Part Number Container Size Case Qty
GS#1 82212 3 oz Tube 12

General Information
Gasket Sealant #1 is a thick, dark brown paste. This product emits an alcohol odor. Gasket Sealant #1 sets to a hard non-flexible gasket upon solvent evaporation. It is recommended for permanent, rigid assemblies. Gasket Sealant #1 reliably seals, gaskets, flanges, connections and other non flexible assemblies. It resists gasoline, motor oil, diesel fuel, transmission fluid, antifreeze and water. This product performs to 400ºF (205ºC).


Gasket Sealant GS#2
Icon Heat  Performs to 400ºF (205ºC)

Charateristic Data Sheets

Product Part Number Container Size Case Qty
GS#2 82312 3 oz Tube 12
  82343 11 oz Tube 12

General Information
Gasket Sealant #2 is a thick, dark paste. This product emits an alcohol odor. Gasket Sealant #2 sets to a semi-flexible gasket upon solvent evaporation. Gasket Sealant #2 reliably seals, gaskets, flanges, connections and other flexible assemblies. It resists gasoline, motor oil, diesel fuel, transmission fluid, antifreeze and water. This product performs to 400ºF (205ºC).


Gasket Sealant GS#3
Icon Heat  Performs to 400ºF (205ºC)

Charateristic Data Sheets

Product Part Number Container Size Case Qty
GS#3 82437 4 oz Brush Top 12
  82457 16 oz Brush Top 12

General Information
Gasket Sealant #3 is a liquid sealant. This product emits an alcohol odor. Gasket Sealant #3 dries to a flexible film that seals gaskets connections and other flexible assemblies. Gasket Sealant #3 is particularly recommended for paper and cork gasket applications. It resists gasoline, motor oil, diesel fuel, transmission fluid, antifreeze and water. This product performs to 400ºF (205ºC).


Gasket Sealant GS#5  Weather-Strip Adhesive
Icon Heat  Performs to 325ºF (163ºC)

Charateristic Data Sheets

Product Part Number Container Size Case Qty
GS#5 82122 5.3 oz Tube 12

General Information
GS #5 Weather-Strip Adhesive is a viscous liquid contact cement suitable for all types of weather-stripping applications and general purpose bonding. GS#5 is suitable for bonding porous and non-porous surfaces. GS#5 can be used to bond rubber, metal, wood, ceramics, gasketing materials, cork, etc. It provides a waterproof bond that in most cases will be sufficiently strong to hold bonded surfaces immediately after application. Full strength will be obtained after 24 hours.


Gasket Sealant GS#1

COLOR: BLACK PASTE
SPECIFIC GRAVITY: 1.25
VISCOSITY: 1,000,000 CPS
FLASH POINT:54ºF
TEMPERATURE RANGE: -65 TO 400ºF
STORAGE STABILITY: +12 MONTHS @ <75ºF
SEALING CAPACITY: 5000 PSI

Attention This product is not to be utilized in pure oxygen or oxygen rich systems.
It is also not to be used for chlorine or other similarly aggressive oxidizing materials.
May affect certain plastics and paints. Try in remote area before using.

Gasket Sealant GS#2

COLOR: BLACK PASTE
SPECIFIC GRAVITY: 1.25
VISCOSITY: 250,000 CPS
FLASH POINT:54ºF
TEMPERATURE RANGE: -65 TO 400ºF
STORAGE STABILITY: +12 MONTHS @ <75ºF
SEALING CAPACITY: 5000 PSI

Attention This product is not to be utilized in pure oxygen or oxygen rich systems.
It is also not to be used for chlorine or other similarly aggressive oxidizing materials.
May affect certain plastics and paints. Try in remote area before using.

Gasket Sealant GS#3

COLOR: BLACK LIQUID
SPECIFIC GRAVITY: 1.25
VISCOSITY: 5,000 CPS
FLASH POINT:54ºF
TEMPERATURE RANGE: -65 TO 400ºF
STORAGE STABILITY: +12 MONTHS @ <75ºF
SEALING CAPACITY: 5000 PSI

Attention This product is not to be utilized in pure oxygen or oxygen rich systems.
It is also not to be used for chlorine or other similarly aggressive oxidizing materials.
May affect certain plastics and paints. Try in remote area before using.

Gasket Sealant GS#5

COLOR: THICK YELLOW LIQUID
SPECIFIC GRAVITY: 0.88
VISCOSITY: 4,000 CPS
TEMPERATURE MAX: 325ºF
STORAGE STABILITY: +12 MONTHS @ <75ºF

Attention Contact cements are not normally recommended for use on some
plastics, such as thermoplastic materials.

SAF-T-LOK and SAF-T-EZE are registered trademarks of SAF-T-LOK International Corporation.

All product names, logos, and brands are property of their respective owners. All product names, logos and brands used on this website are for identification purposes only.

Support/Inquiry