SAF-T-EZE Anti-Seize and Lubricants  
 
   
 
 

CSS3 Dock Menu Css3Menu.com

 
 
 

Aircraft Grade Anti-Seize

     Fastener with Anti-Seize

Graphite/Petroletum and Zinc/Petroletum Anti-Seize
  See Also Red Arrow  Other Anti-Seize Compounds  
     
     
 

SAF-T-EZE® GP - Aircraft Grade Anti-Seize is compounded from graphite and petroletum to satisfy the requirements of MIL-T-5544C and SAE AMS for use on threaded joints.


SAF-T-EZE® ZP - Aircraft Grade Anti-Seize is compounded from zinc and petroletum to meet MIL-T-22361 and A-A-59313 requirements for use on threaded steel parts assembled in aluminum or zinc castings. SAF-T-EZE Aircraft Grades Anti-Seize are also used in other than aircraft precision applications. They do not contain lead, copper or molybdenum disulfide. Certificates of conformance are available for each batch.
 		 SAF-T-EZE Anti-Seize Specialties

  
  SAF-T-EZE Product Line in pdf    Anti-Seize Unlimited Applications  
     
 

 
GP - AIRCRAFT GRADE ANTI-SEIZE
Meets: MIL-T-5544C - SAE AMS-2518A - SAE AMS-2519B - SAE AMS-2519C - SAE AMS-2519D
PERFORMS TO 6500ºF
Characteristic  SAF-T-EZE
Product  		 Part
Number		 Container
Size
BASIC COMPOSITION: GRAPHITE/PETROLETUM
COLOR: BLACK
TEMPERATURE: 6500ºF.
NLGI GRADE: 1
SPECIFIC GRAVITY: 1.2
WEIGHT PER GALLON: 9.16 LBS
FLASH POINT: C.O.C. >250ºF.
PENETRATION: 260-300
PARTICLE SIZE: 1 MIL
GP-16
80755
16oz CAN
General Information
GP Anti-Seize can be used as a lubricant, a sealer, a break in lubricant, a tapping compound on plastics as well as metals. Surface need not be cleaned before application unless grit or low quality oil/grease is present and ultimate performance is required. The reduction in assembly friction increases torque tension by about 20%. Use on threaded parts, bushings, gears, valve stems, chain sprockets, levers, hinges, pivots, rollers, heat exchanger or manifold bolts, or as a gasket release agent, etc.
NOTE: This product is not recommended for pure oxygen systems.
Link to TDS TECHNICAL DATA SHEET   Link to MSDS MATERIAL SAFETY DATA SHEET                                                                                       Arrow Up
 
     
 

 
ZP - AIRCRAFT GRADE ANTI-SEIZE
Meets: MIL-T-22361 - A-A-59313 
PERFORMS TO 750ºF
Characteristic  SAF-T-EZE
Product  		 Part
Number		 Container
Size
BASIC COMPOSITION: ZINC/PETROLETUM
COLOR: SILVER GRAY
TEMPERATURE: -65 TO 750ºF.
NLGI GRADE: 1
SPECIFIC GRAVITY: 1.2
WEIGHT PER GALLON: 9.16 LBS
FLASH POINT: C.O.C. 360ºF.
PENETRATION: 175-200
PARTICLE SIZE: 1 MIL. MAXIMUM
ZPBT-8
ZPBT-16
80737
80757
8oz BRUSH TOP
16oz BRUSH TOP
General Information
ZP Anti-Seize can be used as a lubricant, a sealer, a break in lubricant, a tapping compound on plastics as well as metals. Surface need not be cleaned before application unless grit or low quality oil/grease is present and ultimate performance is required. The reduction in assembly friction increases torque tension by about 20%. Use on threaded parts, bushings, gears, valve stems, chain sprockets, levers, hinges, pivots, rollers, heat exchanger or manifold bolts, or as a gasket release agent, etc.
NOTE: This product is not recommended for pure oxygen systems.
Link to TDS TECHNICAL DATA SHEET  Link to MSDS MATERIAL SAFETY DATA SHEET                                                                                       Arrow Up
 
   
 
InformationOperating Temperature for all SAF-T-EZE Anti-Seize, Lubricants and Sealants Products
 
   
      
 		    
          
    See SAF-T-LOK on You Tube          
  Link to SAF-T-LOK Online Store

Home | SAF-T-LOK Section | SAF-T-EZE Section | Cross Reference | Specifications | MSDS | TDS
Online Store | Contact | Inquiry | Employment  | Site Map | Disclaimer | Trademarks | ©1997-2013

 Link to Specification Page Link to ISO 9001 Certificate ASTM and ISO 9001 Logos