SAF-T-LOK Anti-Seize and Lubricants      

 
     
   
 
  Anti-Seize Compounds


 
   

 

  
  Regular Grade Anti-Seize
 
SAF-T-EZE® Regular Grade Anti-Seize is produced from copper, aluminum and graphite. It has thousands of applications but the primary contribution to performance lies in the ability to resist corrosion. Even in the presence of strong chemicals such as caustic solutions, and acids including dilute sulphuric, hydrochloric and nitric, a quality Anti-Seize will continue to resist galvanic attack by sacrificing the metals in the anti-seize in preference to the metal parts under protection.

Copper Grade Anti-Seize

 
 
SAF-T-EZE® Copper Grade Anti-Seize is produced from copper and graphite. The properties are similar to Regular Anti-Seize but without the aluminum present, the copper color is apparent and the anti-galvanic properties are not as great.		  
       
 
Regular Grade Anti-Seize    PERFORMS TO 2000°F.  
REGULAR GRADE ANTI-SEIZE
Exceeds MIL-A-907-E
Characteristic Product Packaging
BASIC COMPOSITION: COPPER/ALUMINUM/GRAPHITE
COLOR: SILVER GRAY
TEMPERATURE: -65 TO 2000°F.
NLGI GRADE: 1
SPECIFIC GRAVITY: 1.2
WEIGHT PER GALLON: 10.8 LBS
DROP POINT: 380° F.
FLASH POINT: C.O.C. 360°F.
PENETRATION: 270 +-20
PARTICLE SIZE: 1 MIL. MAXIMUM
COEFFICIENT OF FRICTION: 0.07*
* SHELL 4 BALL METHOD.
 SL-4
SL-16
SL-8B
SA-12
SBT-4
SBT-8
SBT-16
ST-1
ST-4
SC-1
S42B
S-130B
S-425B
 		 4 OZ CAN
16 OZ CAN
8 LB CAN
12 OZ AEROSOL
4 OZ BRUSH TOP
8 OZ BRUSH TOP
16 OZ BRUSH TOP
1 OZ TUBE
4 OZ TUBE
16 OZ CARTRIDGE
42 LB PAIL
130 LB DRUM
425 LB DRUM
Application
Can be used as a lubricant, a sealer, a break in lubricant, a tapping compound on plastics as well as metals. Surface need not be cleaned before application unless grit or low quality oil/grease is present and ultimate performance is required. The reduction in assembly friction increases torque tension by about 20%. Use on threaded parts, bushings, gears, valve stems, chain sprockets, levers, hinges, pivots, rollers, heat exchanger or manifold bolts, or as a gasket release agent, etc.
NOTE: This product is not recommended for pure oxygen systems.

 

Copper Grade Anti-Seize   PERFORMS TO 2000°F.  

COPPER GRADE ANTI-SEIZE
Exceeds MIL-A-907-E
Characteristic Product Name Packaging
BASIC COMPOSITION: COPPER/GRAPHITE
COLOR: METALLIC COPPER
TEMPERATURE: -65 TO 2000°F
NLGI GRADE: 1
SPECIFIC GRAVITY: 1.2
WEIGHT PER GALLON: 10.8 LBS
DROP POINT: 380° F
FLASH POINT: C.O.C. 500°F
PENETRATION: 270 +-20
PARTICLE SIZE: 1 MIL. MAXIMUM
COEFFICIENT OF FRICTION: 0.07*
* SHELL 4 BALL METHOD.

SBT-4C
SBT-8C
SBT-16C

 4 OZ CAN
8 OZ BRUSH TOP
16 OZ BRUSH TOP
Application
Can be used as a lubricant, a sealer, a break in lubricant, a tapping compound on plastics as well as metals. Surface need not be cleaned before application unless grit or low quality oil/grease is present and ultimate performance is required. The reduction in assembly friction increases torque tension by about 20%. Use on threaded parts, bushings, gears, valve stems, chain sprockets, levers, hinges, pivots, rollers, heat exchanger or manifold bolts, or as a gasket release agent, etc.
NOTE: This product is not recommended for pure oxygen systems.

 

  
 

 

  
      
      
      
 

 

HOME |  ONLINE STORE | SAF-T-LOK SECTION |  SAF-T-EZE SECTION | CROSS REFERENCE
 CONTACT | INQUIRY | SITE MAP | DISCLAIMER | TRADEMARKS | © 1997-2010