SAF-T-EZE - Marine Grade Anti-Seize.

SAF-T-EZE® Marine Grade Anti-Seize provides protection as a high temperature anti-seize
and extreme pressure lubricant. It stops corrosion, galling and seizure between metal parts.
Marine Grade Anti-Seize provides ultimate protection as a high temperature anti-seize and extreme pressure lubricant and is recommended for service to 2000°F.

SAF-T-EZE® Marine Grade Anti-Seize is formulated to prevent rust and galling in fresh or
salt water. It is compounded from a heat resistant lubricant developed to prevent water wash out.
Marine Grade Anti-Seize is the best choice above or below the water line and meets MIL A 907E.

MARINE GRADE ANTI-SEIZE
Meets MIL-A-907-E

Characteristic	Product	Packaging
COLOR: GRAY TEMPERATURE: -65 TO 2000°F. NLGI GRADE: 1 SPECIFIC GRAVITY: 1.2 WEIGHT PER GALLON: 10.3 LBS PARTICLE SIZE: 1.5 MIL. MAXIMUM (25μ) COEFFICIENT OF FRICTION: 0.08* * SHELL 4 BALL METHOD	MGBT-8 MGBT-16	8 OZ BRUSH TOP 16 OZ BRUSH TOP
Application
*SAF-T-EZE® Marine Grade Anti-Seize* can be used as a lubricant, a sealer, a break-in lubricant, a tapping compound on plastics as well as metals. Surfaces are best cleaned before application as grit or low quality oil/grease may be present and best performance is required. The reduction in assembly friction increases torque tension by about 20 percent. Use on threaded parts, bushings, gears, valve stems, chains, sprockets, levers, hinges, pivots, rollers, heat exchanger or manifold bolts, or as a gasket release agent, etc. NOTE: This product is not recommended for pure oxygen systems.

TDS: Technical Data Sheets MSDS: Material Safety Data Sheets




		HOME \| ONLINE STORE \| SAF-T-LOK SECTION \| SAF-T-EZE SECTION \| CROSS REFERENCE CONTACT \| INQUIRY \| SITE MAP \| DISCLAIMER \| TRADEMARKS \| © 1997-2010