| |
Moly Anti-Seize |
 |
|
|
Moly Grade - Moly 50 - Blue Moly - Dry
Moly |
|
| |
See Also
Other Anti-Seize Compounds
|
|
| |
|
|
| |
On this Page
Moly Grade |
Moly 50 |
Blue Moly |
Dry Moly Film |
|
| |
|
|
| |
SAF-T-EZE® Moly
Grade Anti-Seize is compounded with Molybdenum Disulfide for extreme
pressure applications. This low friction lubricant even prevents wear or
galling on gears or splines operating under high load at low speed.
In fact Moly Grade Anti-Seize will withstand pressure to 0.5 million psi
and perform to 650ºF. Moly Grade and Moly 50 are
not recommended where moisture is present and high temperature
encountered, however. For performance to 1500ºF, see the
Blue-Moly Grade Anti-Seize or
Dry Moly Film for performance to 2400ºF.
 |
|
|
| |
|
|
| |
|
MOLY GRADE ANTI-SEIZE
Meets: MIL-A-907D - MIL-PRF-907E
PERFORMS TO 650ºF |
|
Characteristic |
SAF-T-EZE
Product |
Part
Number |
Container
Size |
BASIC COMPOSITION: MOLYBDENUM / LITHIUM / GRAPHITE
COLOR: BLACK
TEMPERATURE: -65 TO 650ºF.
NLGI GRADE: 1
SPECIFIC GRAVITY: 1.5
WEIGHT PER GALLON: 7.5 LBS
DROP POINT: 380º F.
FLASH POINT: C.O.C. 450ºF.
PENETRATION: 220 +-20
PARTICLE SIZE: 1 MIL. MAXIMUM |
|
|
3oz TUBE
10oz BRUSH TOP
16oz CAN
42lb PAIL |
|
|
General Information |
Moly Grade Anti-Seize is a low friction lubricant that
prevents wear or galling on gears or splines operating
under high load at low speed. Moly Grade Anti-Seize will
withstand pressures to 0.5 million psi and perform to
650ºF. This product is also recommended where copper
contamination must be avoided. Use on threaded parts,
bushings, gears, valve stems, chain sprockets, levers,
hinges, pivots, rollers, heat exchanger or manifold
bolts, or as a gasket release agent, etc.
NOTE: This product is not recommended for pure
oxygen systems. |
|
TECHNICAL DATA SHEET
MATERIAL SAFETY DATA SHEET
 |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
BLUE MOLY GRADE ANTI-SEIZE
Meets: MIL-A-907D - MIL-PRF-907E
PERFORMS TO 1500ºF |
|
Characteristic |
SAF-T-EZE
Product |
Part
Number |
Container
Size |
BASIC COMPOSITION: MOLYBDENUM / NICKEL / GRAPHITE
COLOR: SILVER GRAY
TEMPERATURE: -65 TO 1500ºF.
NLGI GRADE: 1
SPECIFIC GRAVITY: 1.2
WEIGHT PER GALLON: 10.3 LBS
PARTICLE SIZE: 1.5 MIL. MAXIMUM
COEFFICIENT OF FRICTION: 0.08 (SHELL 4 BALL METHOD) |
|
|
|
|
General Information |
Blue-Moly Grade Anti-Seize is recommended where very
different metals are used together such as brass and
steel because Nickel is a hard metal and keeps surfaces
apart. It is also used where high Nickel alloy metals
such as stainless steel, or where Titanium or other hard
metals are involved. Blue-Moly Grade Anti- Seize is also
used where metals such as copper cannot be present, such
as in caustic, ammonium or high acidity processing
plants. Surfaces need not be cleaned before application
unless grit or low quality oil/grease is present and
ultimate performance is required. Use on threaded parts,
bushings, gears, valve stems, chains, sprockets, levers,
hinges, pivots, rollers, heat exchanger bolts, manifold
bolts, or as a gasket release agent, etc.
NOTE: This product is not recommended for pure
oxygen systems. |
|
|
TECHNICAL DATA SHEET
MATERIAL SAFETY DATA SHEET
|
|
|
| |
|
|
| |
|
DRY MOLY FILM ANTI-SEIZE
Clean Dry Lubrication
PERFORMS TO 2400ºF |
|
Characteristic |
SAF-T-EZE
Product |
Part
Number |
Container
Size |
COLOR: DARK GRAY
ODOR: SOLVENT
TEMPERATURE: -100 TO 2400ºF.
SPECIFIC GRAVITY: 1.6 |
|
|
|
|
General Information |
Dry Moly Film is recommended for general plant
maintenance and specifically for environments where
clean, dry lubrication is required. The product
lubricates and protects metal parts from wear and
corrosion. The greaseless finish repels dirt and dust,
and does not rub off, thus making it an ideal lubricant
for dirty, dusty environments, where dirt can clog and
interfere with grease based lubrication. Dry Moly Film
is resistant to water and water-based solutions.
Exposure to temperatures above 400ºF will add resistance
to solvents. In maintenance applications, it is an
excellent choice for lubricating dry bearings, or as an
"easy-off" coating to repel dirt buildup in exhaust
systems. The dry finish makes it excellent for
applications where repeated handling of the lubricated
parts is common.
Dry Moly Film is used in general plant maintenance,
metal working industry, aerospace, wood and paper mills,
textile industry. Use to lubricate and protect door
hinges and chutes. Excellent choice for pre-applied
lubrication of threaded and non-threaded parts. Use as a
lubricant for dry bearing surfaces, slides, conveyor
chains, exposed gears and shafts, valve stems and press
fit applications. In Heavy Equipment/Automotive
applications, it is an ideal lubricant for brake
systems, cables, gears, and couplings. It has extensive
applications in the aerospace industry, where a dry film
lubricant is used on gas turbine engine blades, valves,
bearings, etc.
NOTE: This product is not recommended for pure
oxygen systems. |
|
|
TECHNICAL DATA SHEET
MATERIAL SAFETY DATA SHEET
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
About SAF-T-LOK
Multilingual Introduction
English
Quality Policy
Trademarks
Coordinates
Inquiry Form
SAF-T-LOK® 
Pipe Sealants
English (U.S.A.)
Anti-Seize and Lubricants
SAF-T-LOK Brochure (Download)