SAF-T-EZE - Nickel Grade Anti-Seize.

SAF-T-EZE® Nickel Grade Anti-Seize is compounded from fine particles of nickel, aluminum and graphite in a heat resistant lubricant and performs particularly well as nickel is a hard metal and keeps surfaces apart even under high pressure. It is recommended when very different metals are used together such as brass and steel or where high alloy steel such as stainless are involved. Nickel is also used where soft metals such as copper cannot be present, and it performs to 2600°F.

NICKEL GRADE ANTI-SEIZE
Exceeds MIL-A-907-E NSF registered

Characteristic

SAF-T-EZE
Product

Part
Number

Container
Size

BASIC COMPOSITION: NICKEL/ALUMINUM/GRAPHITE
COLOR: SILVER GRAY
TEMPERATURE: -65 TO 2600°F.
NLGI GRADE: 1
SPECIFIC GRAVITY: 1.2
WEIGHT PER GALLON: 10.3 LBS
DROP POINT: 380° F.
FLASH POINT: C.O.C. 500°F.
PENETRATION: 270 +-20
PARTICLE SIZE: 1 MIL. MAXIMUM
COEFFICIENT OF FRICTION: 0.085*
* SHELL 4 BALL METHOD

SL-16N
SL-8N
SA-12N
SBT-4N
SBT-8N
SBT-16N
SC-1N
S-42N
S-130N
S-425N

80255
80265
80256
80227
80237
80257
80253
80278
80289
80299

16oz CAN
8lb CAN
12oz AEROSOL
4oz BRUSH TOP
8oz BRUSH TOP
16oz BRUSH TOP
16oz CARTRIDGE
42lb PAIL
130lb DRUM
425lb DRUM

Application

Nickel Anti-Seize is recommended where very different metals are used together such as brass and steel because Nickel is a hard metal and keeps surface apart. It is also used where high Nickel alloy metals such as Stainless Steel, or where Titanium or other hard metals are involved. Nickel Anti-Seize is also used where metals such as Copper cannot be present such as in caustic, ammonium or high acidity processing plants. Surface need not be cleaned before application unless grit or low quality oil/grease is present and ultimate performance is required. Use on threaded parts, bushings, gears, valve stems, chain sprockets, levers, hinges, pivots, rollers, heat exchanger or manifold bolts, or as a gasket release agent, etc.
NOTE: This product is not recommended for pure oxygen systems.

TECHNICAL DATA SHEET

MATERIAL SAFETY DATA SHEET

TDS FOR SA-12N ONLY

MSDS FOR SA-12N ONLY

NICKEL PREMIUM ANTI-SEIZE
Exceeds MIL-A-907-E

Characteristic

SAF-T-EZE
Product

Part
Number

Container
Size

BASIC COMPOSITION: NICKEL/ALUMINUM/GRAPHITE
COLOR: SILVER GRAY
TEMPERATURE: -65 TO 2600°F.
NLGI GRADE: 1
SPECIFIC GRAVITY: 1.2
WEIGHT PER GALLON: 10.0 LBS
DROP POINT: 380° F.
FLASH POINT: C.O.C. 440°F.
PENETRATION: 270 +-20
PARTICLE SIZE: 0.5 MIL. MAXIMUM
COEFFICIENT OF FRICTION: 0.08*
* SHELL 4 BALL METHOD

NPT-.25
NPBT-8
NPBT-16

80612
80637
80657

0.25oz TUBE
8oz BRUSH TOP
16oz BRUSH TOP

Application

Nickel Premium Anti-Seize is recommended where very different metals are used together such as brass and steel because Nickel is a hard metal and keeps surface apart. It is also used where high Nickel alloy metals such as Stainless Steel, or where Titanium or other hard metals are involved. Nickel Premium Anti-Seize is also used where metals such as Copper cannot be present such as in caustic, ammonium or high acidity processing plants. Surface need not be cleaned before application unless grit or low quality oil/grease is present and ultimate performance is required. Use on threaded parts, bushings, gears, valve stems, chain sprockets, levers, hinges, pivots, rollers, heat exchanger or manifold bolts, or as a gasket release agent, etc.
NOTE: This product is not recommended for pure oxygen systems.

TECHNICAL DATA SHEET

MATERIAL SAFETY DATA SHEET




		HOME \| ONLINE STORE \| SAF-T-LOK SECTION \| SAF-T-EZE SECTION \| CROSS REFERENCE CONTACT \| INQUIRY \| EMPLOYMENT \| SITE MAP \| DISCLAIMER \| TRADEMARKS \| © 1997-2012