| |
Nuclear
Grade Anti-Seize |
 |
|
|
Nickel - Copper - Stainless Steel Grade
Anti-Seize |
|
| |
|
|
| |
See Also
Other Anti-Seize Compounds
|
|
| |
|
|
| |
On this Page
Nuclear Nickel |
Nuclear Copper |
Nuclear S. Steel |
|
| |
|
|
| |
Formulated from the highest purity
grease to minimize sulphur, halogens, mercury, etc. Nuclear Nickel, Stainless
and Copper Grades are available. These products meets
MIL-A-907D, MIL-PRF-907E and exceeds the requirements
of General Electric, Bechtel and Westinghouse.
Certificates of conformance are included.
 |

|
|
| |
|
|
| |
|
NUCLEAR NICKEL GRADE ANTI-SEIZE
Meets: MIL-A-907D - MIL-PRF-907E
PERFORMS TO 2600ºF |
|
Characteristic |
SAF-T-EZE
Product |
Part
Number |
Container
Size |
BASIC COMPOSITION: NICKEL/GRAPHITE
COLOR: SILVER GRAY
TEMPERATURE: -65 TO 2600ºF.
NLGI GRADE: 1
SPECIFIC GRAVITY: 1.2
WEIGHT PER GALLON: 10.0 LBS
DROP POINT: >500º F.
FLASH POINT: C.O.C. 440ºF.
PENETRATION: 270 +-10
PARTICLE SIZE: 1 MIL. MAXIMUM
COEFFICIENT OF FRICTION: 0.08*
* SHELL 4 BALL METHOD |
|
|
8oz BRUSH TOP
16oz BRUSH TOP |
|
|
General Information |
Nuclear Nickel Grade Anti-Seize is recommended where
product purity is critical and controlled impurities
must be maintained. Surfaces do not need to be cleaned
before applications unless grit or low quality oil /
grease is present and ultimate performance is required.
Use on threaded parts, bushings, gears, valve stems,
chains, sprockets, levers, hinges, pivots, rollers, heat
exchanger bolts, manifold bolts, or as gasket release
agent etc.
Nuclear Nickel Grade Anti-Seize is GE Nuclear Approved
per Appendix A of NEDC-31735P and exceed Requirements of General Electric, Bechtel and
Westinghouse.
NOTE: This product is not recommended for pure
oxygen systems. |
|
TECHNICAL DATA SHEET
MATERIAL SAFETY DATA SHEET
 |
|
|
| |
|
|
| |
|
NUCLEAR COPPER GRADE ANTI-SEIZE
Meets: MIL-A-907D - MIL-PRF-907E
PERFORMS TO 2000ºF |
|
Characteristic |
SAF-T-EZE
Product |
Part
Number |
Container
Size |
BASIC COMPOSITION: COPPER/GRAPHITE
COLOR: DARK BRONZE
TEMPERATURE: -65 TO 2000ºF.
NLGI GRADE: 1
SPECIFIC GRAVITY: 1.2
WEIGHT PER GALLON: 10.0 LBS
DROP POINT: >500º F.
FLASH POINT: C.O.C. 440ºF.
PENETRATION: 180 +-30
PARTICLE SIZE: 1 MIL. MAXIMUM
COEFFICIENT OF FRICTION: 0.09*
* SHELL 4 BALL METHOD |
|
|
|
|
General Information |
Nuclear Copper Grade Anti-Seize is recommended where
product purity is critical and controlled impurities
must be maintained. Surfaces do not need to be cleaned
before applications unless grit or low quality oil /
grease is present and ultimate performance is required.
Use on threaded parts, bushings, gears, valve stems,
chains, sprockets, levers, hinges, pivots, rollers, heat
exchanger bolts, manifold bolts, or as gasket release
agent etc.
Nuclear Copper Grade
Anti-Seize is GE Nuclear Approved
per Appendix A of NEDC-31735P and exceed Requirements of General Electric, Bechtel and
Westinghouse.
NOTE: This product is not recommended for pure
oxygen systems. |
|
TECHNICAL DATA SHEET
MATERIAL SAFETY DATA SHEET
 |
|
|
| |
|
|
| |
|
|
| |
|
NUCLEAR STAINLESS STEEL GRADE ANTI-SEIZE
Meets: MIL-A-907D - MIL-PRF-907E
PERFORMS TO 2500ºF |
|
Characteristic |
SAF-T-EZE
Product |
Part
Number |
Container
Size |
BASIC COMPOSITION: STAINLESS STEEL/GRAPHITE
COLOR: SILVER GRAY
TEMPERATURE: -60 TO 2500ºF.
NLGI GRADE: 1
SPECIFIC GRAVITY: 1.2
WEIGHT PER GALLON: 10.0 LBS
DROP POINT: >500º F.
FLASH POINT: C.O.C. 440ºF.
PENETRATION: 180 +-30
PARTICLE SIZE: 1 MIL. MAXIMUM (25μ)
COEFFICIENT OF FRICTION: 0.09*
* SHELL 4 BALL METHOD |
|
|
|
|
General Information |
Nuclear Stainless Steel Grade Anti-Seize is recommended
where very different metals are used together such as
brass and steel because Stainless Steel is very hard and
keeps surfaces apart. It is also used where high Nickel
alloy metals such as stainless steel, or where Titanium
or other hard metals are involved. Nuclear Stainless
Steel Grade Anti-Seize is also used where metals such as
copper cannot be present, such as in steam turbine
generators or nuclear processing plants. Surfaces need
not be cleaned before application unless grit or low
quality oil/grease is present and ultimate performance
is required. Use on threaded parts, bushings, gears,
valve stems, chains, sprockets, levers, hinges, pivots,
rollers, heat exchanger bolts, manifold bolts, or as a
gasket release agent, etc.
Nuclear Stainless Steel Grade Anti-Seize
exceed Requirements of General Electric, Bechtel and
Westinghouse.
NOTE: This product is not recommended for pure
oxygen systems. |
|
TECHNICAL DATA SHEET
MATERIAL SAFETY DATA SHEET
 |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|