| |
SAF-T-EZE®
Stainless Steel Grade Anti-Seize provides ultimate protection as a high temperature anti-seize and extreme pressure lubricant. Stainless
Steel Anti-Seize stops corrosion, galling and seizure between metal parts and is recommended
for service to 2500°F.
SAF-T-EZE Stainless Steel Anti-Seize is a smooth, non-separating formula consisting of a
lithium soap thickened grease into which is compounded to Stainless
Steel, aluminum as well as graphite lubricants and corrosion fighting inhibitors. This high performance
grease and solid additives provide extreme pressure lubricating properties that prevent
galling and cold welding and at the same time prevent water wash out and galvanic
pitting from electrolysis of road salt, acid rain or salt water. The particles present are
inert and will not evaporate at extreme temperatures and their heat resistant qualities
will prevent carbon fusion and seizure at temperatures approaching 2500°F. This
anti-seize compound does not contain lead, molybdenum disulfate or halogen compounds.
|
 |
|
| |
|
|
STAINLESS
STEEL
GRADE ANTI-SEIZE
Satisfies
MIL-A-907-E |
| Characteristic |
Product |
Packaging |
BASIC
COMPOSITION: STAINLESS STEEL/GRAPHITE
COLOR: SILVER GRAY
TEMPERATURE: -60 TO 2500°F.
NLGI GRADE: 1
SPECIFIC GRAVITY: 1.2
WEIGHT PER GALLON: 10.0 LBS
DROP POINT: 380° F.
FLASH POINT: C.O.C. 500°F.
PENETRATION: 180 +-30
PARTICLE SIZE: 1 MIL. MAXIMUM (25μ)
COEFFICIENT OF FRICTION: 0.09*
* SHELL 4 BALL METHOD
|
SSBT-8
SS-160
|
8 OZ BRUSH TOP
500 GM JAR |
| Application |
SAF-T-EZE Stainless Steel Anti-Seize is recommended where very different
metals are used together such as brass and steel because Stainless Steel is a
very hard and keeps surfaces apart. It is also used where high Nickel alloy metals
such as stainless steel, or where Titanium or other hard metals are involved. Stainless
Steel Anti-Seize is also used where metals such as copper cannot be present, such
as in steam turbine generators or nuclear processing plants. Surfaces need not be
cleaned before application unless grit or low quality oil/grease is present and ultimate
performance is required. Use on threaded parts, bushings, gears, valve stems, chains,
sprockets, levers, hinges, pivots, rollers, heat exchanger bolts, manifold bolts, or as
a gasket release agent, etc.
NOTE: This product is not recommended for
pure oxygen systems. |
|
|
|
|
|
|
NICKEL
PREMIUM ANTI-SEIZE
Exceeds MIL-A-907-E |
| Characteristic |
Product
Name |
Packaging |
BASIC
COMPOSITION: NICKEL/ALUMINUM/GRAPHITE
COLOR: SILVER GRAY
TEMPERATURE: -65
TO 2600°F.
NLGI GRADE: 1
SPECIFIC GRAVITY: 1.2
WEIGHT PER GALLON: 10.0 LBS
DROP POINT: 380° F.
FLASH POINT: C.O.C. 440°F.
PENETRATION: 270 +-20
PARTICLE SIZE: 0.5 MIL. MAXIMUM
COEFFICIENT OF FRICTION: 0.08*
*
SHELL 4 BALL METHOD
|
NPT-25
NP-16
NPBT-8
NPBT-16
|
2
OZ TUBE
16 OZ CAN
8 OZ BRUSH TOP
16 OZ BRUSH TOP
|
| Application |
Nickel
Premium Anti-Seize is recommended where very different
metals are used together such as brass and steel because
Nickel is a hard metal and keeps surface apart. It is also
used where high Nickel alloy metals such as Stainless Steel,
or where Titanium or other hard metals are involved. Nickel
Premium Anti-Seize is also used where metals such as Copper
cannot be present such as in caustic, ammonium or high
acidity processing plants. Surface need not be cleaned
before application unless grit or low quality oil/grease is
present and ultimate performance is required. Use on
threaded parts, bushings, gears, valve stems, chain
sprockets, levers, hinges, pivots, rollers, heat exchanger
or manifold bolts, or as a gasket release agent, etc.
NOTE: This product is not recommended for pure
oxygen systems. |
|
|
|
|
|
