SAF-T-EZE Logo
Fastener with Anti-Seize
Anti-Seize
Nickel Grade and Nickel Premium Anti-Seize


SAF-T-EZE® Nickel Grade Anti-Seize is compounded from fine particles of nickel, aluminum and graphite in a heat resistant lubricant and performs particularly well as nickel lubricates and keeps the metallic surfaces apart even under high pressure.

It is recommended when very different metals are used together such as brass and steel or where high nickel alloy metals such as stainless steel are involved. Nickel Anti-Seize is also used where soft metals such as copper cannot be present, and it performs to 2600ºF (1425ºC).

 

Anti-Seize Unlimited Applications  Chart Operating Temperature  STL-30 Clean Hand Pumper

Nickel Grade Anti-SeizeNSF H 2Registered


Nickel Grade Anti-Seize
Icon Heat  Performs to 2600ºF (1425ºC)
Meets: MIL-PRF-907E - NSF H2 Registered

Characteristic  Data Sheets

Product Part Number Container Size Case Qty
ST-1N 80212 1 oz Tube 25
ST-4N 80222 4 oz Tube 10
SBT-4N 80227 4 oz Brush Top 24
SBT-8N 80237 8 oz Brush Top 12
SC-1N 80253 16 oz Cartridge 12
SL-16N
80255 16 oz Can 12
SA-12N 80256 12 oz Aerosol 12
SBT-16N 80257 16 oz Brush Top 12
S-160N 80259 500 g Tub 12
SL-2N 80260 2 lb Tub 6
SL-1KN 80261 1 kg Tub 6
SL-8N 80265 8 lb Can 4
S-42N 80278 42 lb Pail ---
S-130N 80289 130 lb Drum ---
S-425N 80299 425 lb Drum ---

General Information
SAF-T-EZE® Nickel Grade Anti-Seize is recommended where very different metals are used together such as brass and steel because Nickel is a very unreactive metal that protects and lubricates the metallic surfaces. It is also used where high Nickel alloy metals such as Stainless Steel, or where Titanium or other hard metals are involved. Nickel Anti-Seize is also used where metals such as copper cannot be present such as in caustic, ammonium or high acidity processing plants. Surface need not be cleaned before application unless grit or low quality oil/grease is present and ultimate performance is required. Use on threaded parts, bushings, gears, valve stems, chain sprockets, levers, hinges, pivots, rollers, heat exchanger or manifold bolts, or as a gasket release agent, etc.


Nickel Premium Anti-Seize
Icon Heat  Performs to 2600ºF (1425ºC)
Meets: MIL-PRF-907E

Charateristic Data Sheets

Product Part Number Container Size Case Qty
NPT-.25 80612 0.25 oz Tube 50
NPT-4 80622 4 oz Tube 10
NPBT-4 80627 4 oz Brush Top 12
NPBT-8 80637 8 oz Brush Top 12
NPC-1 80653 16 oz Cartridge 12
NPBT-16 80657 16 oz Brush Top 12
NPSL-2 80660 2 lb Tub 6
NPSL-8 80665 8 lb Can 4
NP-42 B 80678 42 lb Pail ---
NP-130 B 80689 130 lb Drum ---
NP-425 B 80699 425 lb Drum --

General Information
SAF-T-EZE® Nickel Premium Anti-Seize is recommended where very different metals are used together such as brass and steel because Nickel is a very unreactive metal that protects and lubricates the metallic surfaces. It is also used where high Nickel alloy metals such as Stainless Steel, or where Titanium or other hard metals are involved. Nickel Premium Anti-Seize is also used where metals such as Copper cannot be present such as in caustic, ammonium or high acidity processing plants. Surface need not be cleaned before application unless grit or low quality oil/grease is present and ultimate performance is required. Use on threaded parts, bushings, gears, valve stems, chain sprockets, levers, hinges, pivots, rollers, heat exchanger or manifold bolts, or as a gasket release agent, etc.


Use SAF-T-EZE® Anti-Seize for Ultimate Protection!

Nickel Grade Anti-Seize

NSF H2 REGISTERED
BASIC COMPOSITION: NICKEL/ALUMINUM/GRAPHITE
COLOR: SILVER GRAY
TEMPERATURE: -65ºF TO 2600ºF
NLGI GRADE: 3
SPECIFIC GRAVITY: 1.33 gm/cc
WEIGHT PER GALLON: 11.09 LB
DROP POINT: 350ºF
FLASH POINT: C.O.C. >302ºF
PENETRATION: 225 ± 25
PARTICLE SIZE: 1 MIL. MAXIMUM (25)

Attention This product is not recommended for pure oxygen systems.

Nickel Premium Anti-Seize

BASIC COMPOSITION: NICKEL/ALUMINUM/GRAPHITE
COLOR: SILVER GRAY
TEMPERATURE: -65ºF TO 2600ºF
NLGI GRADE: 3
SPECIFIC GRAVITY: 1.28 gm/cc
WEIGHT PER GALLON: 10.68 LB
DROP POINT: 350ºF
FLASH POINT: C.O.C. >302ºF
PENETRATION: 225 ± 25
PARTICLE SIZE: 1 MIL. MAXIMUM (25)

Attention This product is not recommended for pure oxygen systems.

Icon PDF
Nickel Premium Anti-Seize

TECHNICAL DATA SHEET
SAFETY DATA SHEET

SAF-T-LOK and SAF-T-EZE are registered trademarks of SAF-T-LOK International Corporation.

All product names, logos, and brands are property of their respective owners. All product names, logos and brands used on this website are for identification purposes only.