Espa˝ol  Franšais            
  SAF-T-EZE Anti-Seize and Lubricants  
 
 

CSS3 Dock Menu Css3Menu.com

 
 
 

Nuclear Grade Anti-Seize 

    Fastener with Anti-Seize

Nickel - Copper - Stainless Steel Grade Anti-Seize

 
   
 See Also Arrow right  Other Anti-Seize Compounds  
   
 On this Page Arrow right  Nuclear Nickel | Nuclear Copper | Nuclear Stainless Steel 
   
 Formulated from the highest purity grease to minimize sulphur, halogens, mercury, etc. Nuclear Nickel, Stainless and Copper Grades anti-seize are available. These products meets MIL-A-907D,  MIL-PRF-907E and exceeds the requirements of General Electric, Bechtel and Westinghouse.

Certificates of conformance are included.

SAF-T-EZE Product Line in pdf    Anti-Seize Unlimited Applications
    STL-30 Clean Hand Pumper
Nuclear Power Plant

 
   
 

 
NUCLEAR NICKEL GRADE ANTI-SEIZE
Meets: MIL-A-907D - MIL-PRF-907E
PERFORMS TO 2600ºF
Characteristic SAF-T-EZE
Product  
Part
Number
Container
Size
BASIC COMPOSITION: NICKEL/GRAPHITE
COLOR: SILVER GRAY
TEMPERATURE: -65 TO 2600ºF
NLGI GRADE: 3-4
SPECIFIC GRAVITY: 1.2
WEIGHT PER GALLON: 10.0 LB
DROP POINT: >500ºF
FLASH POINT: C.O.C. 440ºF
PENETRATION: 270 +-10
PARTICLE SIZE: 1 MIL. MAXIMUM
COEFFICIENT OF FRICTION: 0.08*
* SHELL 4 BALL METHOD
NG-8B
NGBT-8
NGBT-16
80465
80433
80457
8 LB CAN
8 OZ BRUSH TOP
16 OZ BRUSH TOP
General Information
Nuclear Nickel Grade Anti-Seize is recommended where product purity is critical and controlled impurities must be maintained. Surfaces do not need to be cleaned before applications unless grit or low quality oil / grease is present and ultimate performance is required. Use on threaded parts, bushings, gears, valve stems, chains, sprockets, levers, hinges, pivots, rollers, heat exchanger bolts, manifold bolts, or as gasket release agent etc.

Nuclear Nickel Grade Anti-Seize is GE Nuclear Approved per Appendix A of NEDC-31735P and exceed Requirements of General Electric, Bechtel and Westinghouse.
NOTE: This product is not recommended for pure oxygen systems.
Link to TDS TECHNICAL DATA SHEET  Link to MSDS MATERIAL SAFETY DATA SHEETArrow Up
 
   
 

 
NUCLEAR COPPER GRADE ANTI-SEIZE
Meets: MIL-A-907D - MIL-PRF-907E
PERFORMS TO 2000ºF
Characteristic SAF-T-EZE
Product  
Part
Number
Container
Size
BASIC COMPOSITION: COPPER/GRAPHITE
COLOR: DARK BRONZE
TEMPERATURE: -65 TO 2000ºF
NLGI GRADE: 4
SPECIFIC GRAVITY: 1.2
WEIGHT PER GALLON: 10.0 LB
DROP POINT: >500ºF
FLASH POINT: C.O.C. 440ºF
PENETRATION: 180 +-30
PARTICLE SIZE: 1 MIL. MAXIMUM
COEFFICIENT OF FRICTION: 0.09*
* SHELL 4 BALL METHOD
NGBT-16C
80557
16 OZ BRUSH TOP
General Information
Nuclear Copper Grade Anti-Seize is recommended where product purity is critical and controlled impurities must be maintained. Surfaces do not need to be cleaned before applications unless grit or low quality oil / grease is present and ultimate performance is required. Use on threaded parts, bushings, gears, valve stems, chains, sprockets, levers, hinges, pivots, rollers, heat exchanger bolts, manifold bolts, or as gasket release agent etc.

Nuclear Copper Grade Anti-Seize is GE Nuclear Approved per Appendix A of NEDC-31735P and exceed Requirements of General Electric, Bechtel and Westinghouse.
NOTE: This product is not recommended for pure oxygen systems.
Link to TDS TECHNICAL DATA SHEET  Link to MSDS MATERIAL SAFETY DATA SHEETArrow Up
 
   
   
 

 
NUCLEAR STAINLESS STEEL GRADE ANTI-SEIZE
Meets: MIL-A-907D - MIL-PRF-907E
PERFORMS TO 2500ºF
Characteristic SAF-T-EZE
Product  
Part
Number
Container
Size
BASIC COMPOSITION: STAINLESS STEEL/GRAPHITE
COLOR: BLACK
TEMPERATURE: -60 TO 2500ºF
NLGI GRADE: 2-3
SPECIFIC GRAVITY: 1.2
WEIGHT PER GALLON: 10.0 LB
DROP POINT: >500ºF
FLASH POINT: C.O.C. 440ºF
PENETRATION: 240 - 300
PARTICLE SIZE: 1 MIL. MAXIMUM (25μ)
COEFFICIENT OF FRICTION: 0.09*
* SHELL 4 BALL METHOD
NGBT-8SS
NGL-16SS
80437
80455
8 OZ BRUSH TOP
16 OZ CAN
General Information
Nuclear Stainless Steel Grade Anti-Seize is recommended where very different metals are used together such as brass and steel because Stainless Steel is very hard and keeps surfaces apart. It is also used where high Nickel alloy metals such as stainless steel, or where Titanium or other hard metals are involved. Nuclear Stainless Steel Grade Anti-Seize is also used where metals such as copper cannot be present, such as in steam turbine generators or nuclear processing plants. Surfaces need not be cleaned before application unless grit or low quality oil/grease is present and ultimate performance is required. Use on threaded parts, bushings, gears, valve stems, chains, sprockets, levers, hinges, pivots, rollers, heat exchanger bolts, manifold bolts, or as a gasket release agent, etc.
NOTE: This product is not recommended for pure oxygen systems.
Link to TDS TECHNICAL DATA SHEET  Link to MSDS MATERIAL SAFETY DATA SHEETArrow Up
 
   
 
InformationOperating Temperatures for all SAF-T-EZE Anti-Seize, Lubricants and Sealants Products.
 
   
   
      
 
   
          
     
  Link to SAF-T-LOK Online Store

Home | SAF-T-LOK Section | SAF-T-EZE Section | Cross Reference | Specifications | MSDS | TDS | Online Store
Mobile Site | Contact | Inquiry | Employment | Site Map | Disclaimer | ® Trademarks | Espa˝ol | Franšais

SAF-T-LOK on YouTube