SAF-T-EZE ANTI-SEIZE - LUBRICANTS - MAINTENANCE PRODUCTS

         


Click to enlarge the product picture

 
 
Flange-Seal
 
SAF-T-EZE® Flange-Seal is a unique polymer gel developed to seal flanges.
t exhibits temperature resistance to 600°F. and was formulated for repeated
use on machined flanges or with gaskets. It is non-hardening, removable and reusable.
 

Flange-Seal Being Applied
 

 

Flange-Seal   PERFORMS TO 600°F.  

FLANGE SEALANT
Characteristic Product Packaging
BASIC COMPOSITION: POLYMER GEL
TEMPERATURE: -60 TO 600°F.
  • PERMANENTLY FLEXIBLE
  • NON HARDENING
  • REMOVABLE
  • FILL GAPS TO 0.10" AND FILL MANY
    SURFACE FLAWS
  • VIBRATION RESISTANT
  • ABSORB SHOCK AND THERMAL CYCLING
    WITHOUT CRACKING OR DEGRADATION
  • RESISTANCE TO ALL FUELS, OILS, GASES,
    COOLANTS AND FLUOROCARBONS
 FST-3
FSC-12
 		 3 OZ TUBE
12 OZ CARTRIDGE
 
General Information
Flange-Seal is a unique polymer gel formulated to seal flanges with or without gaskets. It is used with any gasket construction without fear of deterioration. Flange-Seal holds pre-cut gaskets in place during assembly as a tacking agent and also allows for repositioning. It will provide low pressure seals for gaskets but the operating temperature is dependent upon flange thickness and geometry.

 

 

Torque-Seal   PERFORMS TO 600°F.  

TORQUE SEALANT
Characteristic Product Name Packaging
BASIC COMPOSITION: POLYMER GEL
TEMPERATURE: -60 TO 600°F.
  • PERMANENTLY FLEXIBLE
  • NON HARDENING
  • REMOVABLE
  • FILL GAPS TO 0.10" AND FILL MANY
    SURFACE FLAWS
  • VIBRATION RESISTANT
  • ABSORB SHOCK AND THERMAL CYCLING
    WITHOUT CRACKING OR DEGRADATION
  • RESISTANCE TO ALL FUELS, OILS, GASES,
    COOLANTS AND FLUOROCARBONS
 TSBT-8
TSBT-16
 		 8 OZ BRUSH TOP
16 OZ BRUSH TOP
 
General Information
Torque-Seal is a unique polymer gel formulated to seal threaded assemblies as well as gaskets. It is used with any thread type as well as any metal or plating surface. Torque-Seal holds threaded parts in place and also allows for responding. It will provide low pressure seals for threaded parts but the operating pressure is dependent upon thread size and engagement.

 

 

Pipe-Seal   PERFORMS TO 500°F.  

PIPE SEALANT  (with PTFE)
Characteristic Product Name Packaging
BASIC COMPOSITION: PTFE
COLOR: WHITE
TEMPERATURE: -100 TO 500°F.
SPECIFIC GRAVITY: 1.3
MAXIMUM PRESSURE: 1000 PSI
FLASH POINT: C.O.C. 350°F.
  		PSBT-8
PSBT-16
PS-10
 		 8 OZ BRUSH TOP
16 OZ BRUSH TOP
10 LB CAN
 
General Information
Pipe-Seal with PTFE is used where resistance to chemicals is needed. It can be used on services that contain gasoline, kerosene, LP gases, oil, refrigerants / solvents, caustics, many acids, water, gas and steam. It can be used on pipes and threaded connections of all materials. Pipe-Seal is recommended for heavy duty sealing on joints larger than 3/4" in diameter. Pipe-Seal can be applied as low as 10°F.
NOTE: This product is not recommended for pure oxygen systems.

 

 

Fine Pipe-Seal   PERFORMS TO 500°F.  

FINE PIPE SEALANT  (with PTFE)
Characteristic Product Name Packaging
BASIC COMPOSITION: PTFE
COLOR: WHITE
TEMPERATURE: -100 TO 500°F.
SPECIFIC GRAVITY: 1.08
MAXIMUM PRESSURE: 10,000 PSI
FLASH POINT: C.O.C. 55°F
 		 FPBT-4
FPBT-8
FPBT-16
 		 4 OZ BRUSH TOP
8 OZ BRUSH TOP
16 OZ BRUSH TOP
 
General Information
Fine Pipe-Seal with PTFE is used where resistance to chemicals is needed. It can be used on services that contain gasoline, kerosene, LP gases, oil, refrigerants / solvents, caustics, many weak acids, water, gas and steam. It can be used on pipes and threaded connections of all materials: Iron, Stainless Steel, Aluminum, Brass, Plastic, etc. Fine Pipe-Seal is recommended for sealing of joints less than 3/4" in diameter. This liquid sealant is self-lubricating in assembly. This product will not swell or attack rubber parts.
NOTE: This product is not recommended for pure oxygen systems.