Instant Bonder Key Properties

Ethyl and Methyl Cyanoacrylate Adhesives

SAF-T-LOK Product	Viscosity (cps)	Gap Fill (in.)	Specific Gravity	Flash Point COC (ºF)	Vapor Pressure at 70ºC. mm HG	Melting Point ºF	Service Temperature ºF	Tensile Shear Strength Steel/Steel, lbs./in² ASTM D-2095	Impact Strength, Steel/Steel, lbs./in² ASTM-950
Cyanoacrylate Adhesives - Ethyl Series
IB5	5	.002	1.05	185	8	365	-114 to +180	4000	3-5
IB20	20	.002	1.05	185	8	365	-114 to +180	4000	5-10
IB45	45	.003	1.05	185	8	365	-114 to +180	4700	7-14
IB100	100	.004	1.06	185	8	365	-114 to +180	4000	3-5
IB300	300	.005	1.06	185	8	365	-114 to +180	4000	3-5
IB600	600	.006	1.06	185	8	365	-114 to +180	4000	3-5
IB1500	1500	.010	1.06	185	8	365	-114 to +180	400	3-5
IB2500	2500	.015	1.06	185	8	365	-114 to +180	4000	3-5
IB-SI	100	.010	1.10	185	8	365	-114 to +180	4000	3-5
IB-HT	100	.004	1.08	185	8	370	-114 to +300	3500	8-12
IB-HI	1500	.012	1.10	185	8	365	-114 to +180	5000	15-25
IB-EPDM	100	.010	1.10	185	8	365	-114 to +180	4000	3-5
IB-NF	100	.010	1.10	185	8	365	-114 to +180	3000	3-5
IB-B	3500	.012	1.10	185	8	365	-114 to +210	5000	15-25
IB-101	100	------	1.09	185	8	365	-114 to +180	500	3-5
IB-GEL	5000	.015	1.10	185	8	365	-114 to +180	4000	15-25
SAF-T-LOK Product	Viscosity (cps)	Gap Fill (in.)	Specific Gravity	Flash Point COC (ºF)	Vapor Pressure at 70ºC. mm HG	Melting Point ºF	Service Temperature ºF	Tensile Shear Strength Steel/Steel, lbs./in² ASTM D-2095	Impact Strength, Steel/Steel, lbs./in² ASTM-950
Cyanoacrylate Adhesives - Methyl Series
IBM5	5	.002	1.10	167	10	400	-114 to +180	5000	3-6
IBM45	45	.002	1.09	167	10	400	-114 to +180	5000	3-6
IBM100	100	.004	1.08	167	10	400	-114 to +180	5000	3-6




		Home \| SAF-T-LOK Section \| SAF-T-EZE Section \| Cross Reference \| Specifications \| MSDS \| TDS Online Store \| Contact \| Inquiry \| Employment \| Site Map \| Disclaimer \| Trademarks \| ©1997-2013