SAF-T-LOK Adhesives and Selants      

 
     
   
 
 

Gasketing

 

 
 
PFS - Polymeric Flange Sealants
PFS Replaces most conventional gaskets on metal surfaces. It cures in the absence of air and will not shrink, tear or crack and provides maximum face to face contact of mated parts. PFS Gasket provides an instant seal at low pressures and fully cures in 1 to 8 hours depending upon part configuration and clearance. No retorquing of flange bolts is required as stress relaxation of this Polymeric Flange Sealant does not occur and face to face contact of the metal surfaces makes this unnecessary.
 

 
     
 
PFS Yellow
- General purposes.
- Replaces Gaskets.
- Fills gap to .05"
- Non-shrinking
- No retorquing required
- Remains flexible.
- Removal with normal tools.
- Chemical and fluids resistant.
- Also use with existing gaskets.		 PFS Red
- High viscosity
- Replaces Gaskets.
- Fills gap to .05"
- Non-shrinking
- No retorquing required
- Remains semi-flexible.
- Removal with normal tools.
- Chemical and fluids resistant.
- Also use with existing gaskets.		 PFS Blue
- For Aluminum/Steel parts
- Replaces Gaskets.
- Fills gap to .05"
- Non-shrinking
- No retorquing required
- Remains semi-flexible.
- Removal with normal tools.
- Chemical and fluids resistant.
- Also use with existing gaskets.
 
     
 

 
Flange Sealants Product Applications / Properties
PFS Yellow
PFS Red
PFS Blue
PFS 51
REPLACES GASKETS - GENERAL PURPOSE
REPLACES GASKETS - HIGH VISCOSITY
REPLACES GASKETS - FOR ALUMINUM/ STEEL
REPLACES GASKETS - HI-TEMPERATURE
 
 


Other Sealing Products : Thread Sealing | Pipe Sealing | RTV Silicone

 

  
      
      
      
 

 

HOME |  ONLINE STORE | SAF-T-LOK SECTION |  SAF-T-EZE SECTION | CROSS REFERENCE
 CONTACT | INQUIRY | SITE MAP | DISCLAIMER | TRADEMARKS | © 1997-2010