Material Safety Data Sheet


HI-TEMP
I-TPS
IDENTITY (as used on label and list)
ANAEROBIC ADHESIVE/SEALANT I-TPS-HT
Manufacturer’s name
SAF-T-LOK CHEMICAL CORPORATION
300 EISENHOWER LANE NORTH
LOMBARD, ILLINOIS, USA 60148		 Emergency Telephone Number
Chemtrec 1-800-424-9300
Telephone Number for Information
630-495-2001
Date Prepared
NOVEMBER 01, 2007
Section II—Hazardous Ingredients/Identity Information
Hazardous Components
(Specific Chemical Identity, Common Name(s))
OSHA PEL
ACGIH TLV

Other Limits Recommended
% (optional)
None  
       
   
       
   
       
All components of this product are listed on the Toxic Substance Control Act (TSCA) inventory of chemical substances maintained by the U.S. Environmental Protection Agency.
 

Section III—Physical/Chemical Characteristics
Boiling Point >300°F Specific Gravity (H20 = 1)     1.07
Vapor Pressure (mm Hg) <5 @ 30°F Melting Point N/A
Vapor Density (AIR = 1) N/A Evaporation Rate (Butyl Acetate = 1) N/A
Solubility in Water Partial
Appearance and Odor Creamy paste, mild odor

 

Section IV—Fire and Explosion Hazard Data
Flash Point (Method Used)      T.C.C. 855°F
Flammable Limits  
LEL  N/A
UEL N/A
 

Extinguishing Media

 CO2, Foam, Dry chemicals
Special Fire Fighting Procedures Air mask and procedures for fighting chemical fires.
Unusual Fire and Explosion Hazards  
 
Section V—Reactivity Data
Stability Unstable   Conditions to Avoid   N/A
Stable X
Incompatibility (Materials to Avoid)  
Hazardous Decomposition or Byproducts  
Hazardous
Polymerization		 May Occur   Conditions to Avoid    
Temperatures over 120°F
Will not Occur X
 
Section VI—Health Hazard Data
Route(s) of Entry: Inhalation?
N/A		 Skin?
See Below

 Ingestion?
See Below
Health Hazards (Acute and Chronic)

 
Carcinogenicity:

        
NTP?
 No		 IARC Monographs?
 No		 OSHA Regulated
 No

 
Signs and Symptoms of Exposure

Prolonged skin contact may cause dermatitis in sensitive individuals.
Medical Conditions Generally aggravated
by Exposure

N/A
Emergency and First Aid Procedures

SKIN and EYE Contact: Flush with water. INGESTION: Keep calm, remove to fresh air. Do not induce vomiting. Obtain medical assistance.
 
Section VII—Precautions for Safe Handling and Use
Steps to be Taken in Case Material is
Released or Spilled

Provide good ventilation. Avoid eye and skin contact. Soak up spill with earth, sand or absorbent product (Zorbal). Recover in Container.
Waste Disposal Method

Dispose in accordance with State, Federal, and local anti-pollution and waste disposal regulations.
Precautions to be Taken
in Handling and Storing

Store below 80°F for prolonged shelf life. Store in original container.
Other Precautions

Avoid prolonged skin contact.
 
Section VIII—Control Measures
Respiratory Protection (Specify Type)

Not normally necessary but product should be used in areas of good ventilation.
Ventilation:
Local Exhaust Yes
Special N/A
Mechanical (General) N/A
Other N/A
Protective Gloves Recommended
Eye Protection Recommended
Other Protective Clothing or Equipment

N/A
Work/Hygienic Practices

Wash hands thoroughly after use.

The information on this data sheet represents our current data and best opinion as to the proper use in handling of this product under normal conditions. Any use of the product which is not in conformance with this data sheet or which involves using the product in combination with any other product or any other process is the responsibility of the user.