Material Safety Data Sheet


RTV SILICONE 732
RED HI-TEMP
IDENTITY (as used on label and list)
SAF-T-LOK RTV SILICONE 732
Manufacturer’s name
SAF-T-LOK CHEMICAL CORPORATION
300 EISENHOWER LANE NORTH
LOMBARD, ILLINOIS, USA 60148		 Emergency Telephone Number
Chemtrec 1-800-424-9300
Telephone Number for Information
630-495-2001
Date Prepared
NOVEMBER 01, 2007
Section II—Hazardous Ingredients/Identity Information
Hazardous Components
(Specific Chemical Identity, Common Name(s))
OSHA PEL
ACGIH TLV

Other Limits Recommended
% (optional)
* Acetoxysilane  
  10ppm    
* TLV based on acetic acid formed during curing
       
   
       
All components of this product are listed on the Toxic Substance Control Act (TSCA) inventory of chemical substances maintained by the U.S. Environmental Protection Agency.
 

Section III—Physical/Chemical Characteristics
Boiling Point >300°F Specific Gravity (H20 = 1)     1.05
Vapor Pressure (mm Hg)            @ 77°F <5 mm Melting Point N/A
Vapor Density (AIR = 1) N/A Evaporation Rate (Butyl Acetate = 1) <1
Solubility in Water Less than 0.1%
Appearance and Odor Semi-solid material with acetic acid odor. Red color.

 

Section IV—Fire and Explosion Hazard Data
Flash Point (Method Used)      Open cup >250°F
Flammable Limits  
LEL  N/A
UEL N/A
 

Extinguishing Media

 Water, water fog, Carbon Dioxide, dry chemical, foam.
Special Fire Fighting Procedures Self contained breathing apparatus and protective clothing should be worn in fighting fires involving chemicals.
Unusual Fire and Explosion Hazards None Known.
 
Section V—Reactivity Data
Stability Unstable   Conditions to Avoid  
Exposure to air until ready to use.
Stable X
Incompatibility (Materials to Avoid) Oxidizing material can cause a reaction.
Hazardous Decomposition or Byproducts Silicon Dioxide, Carbon Dioxide and traces of incompletely burned carbon products.
Hazardous
Polymerization		 May Occur   Conditions to Avoid   N/A
Will not Occur X
 
Section VI—Health Hazard Data
Route(s) of Entry: Inhalation?
Yes		 Skin?
Yes

 Ingestion?
Yes
Health Hazards (Acute and Chronic)

EYES: Direct contact may burn eyes, irritate severely or permanently injure depending on exposure. SKIN: May cause irritation. INHALATION: May cause drowsiness & irritate nose and throat. Vapors may injure blood, lungs, liver and nervous systems. INGESTION: Small amounts should not injure. Inhaling liquid while vomiting can injure lungs seriously.
Carcinogenicity: N/A

       
NTP?
 		 IARC Monographs?
 		 OSHA Regulated
 

 
Signs and Symptoms of Exposure

Vary according to degree of exposure. Minimal exposure should not injure. See above for symptoms of prolonged exposure.
Medical Conditions Generally aggravated
by Exposure

Prolonged toluene overexposure may aggravate existing eye, skin & respiratory disorder.
Emergency and First Aid Procedures

EYES: Flush with water for 15 minutes, get medical attention. SKIN: Wash with soap and water. INHALATION: Remove to fresh air. INGESTION: Get immediate medical attention if a large amount is swallowed..
 
Section VII—Precautions for Safe Handling and Use
Steps to be Taken in Case Material is
Released or Spilled

Use absorbent material to collect and contain for salvage or disposal. Remove all source of ignition and wear proper protection equipment.
Waste Disposal Method

Dispose in accordance with State, Federal, and local anti-pollution and waste disposal regulations.
Precautions to be Taken
in Handling and Storing

Keep container closed and away from heat, sparks and open flame.
Other Precautions

Static electricity may accumulate and create fire hazard. Ground fixed equipment.
 
Section VIII—Control Measures
Respiratory Protection (Specify Type)

Organic vapor type.
Ventilation:
Local Exhaust Recommended
Special N/A
Mechanical (General) Recommended
Other N/A
Protective Gloves Rubber or plastic
Eye Protection Chemical worker goggles
Other Protective Clothing or Equipment

Aprons, boots
Work/Hygienic Practices

Wash promptly upon any detectable contact.

The information on this data sheet represents our current data and best opinion as to the proper use in handling of this product under normal conditions. Any use of the product which is not in conformance with this data sheet or which involves using the product in combination with any other product or any other process is the responsibility of the user.