Homepage
Online Store
Español
Français
Retainer Adhesive Key Properties
Anaerobic Adhesive Retaining Compounds
Retainer Adhesive - R01
| Viscosity (cps at 12 rpm): | 125 |
|---|---|
| Color: | Green |
| Gap Filling (in. Max): | .005 |
| Locking Shear (psi): | 3000 |
| Temperature Limit: | 350ºF (177ºC) |
| Torque Strength (in. lb) 3/8-16 Steel Cleaned Breakaway: Prevailing: |
300 375 |
| Cure Time with Primer T Fixture (min.): Cure (hr): |
5 1 |
| Cure Time without Primer T Fixture (min.): Cure (hr): |
20 6 |
Retainer Adhesive - R20
| Viscosity (cps at 12 rpm): | 7000 |
|---|---|
| Color: | Green |
| Gap Filling (in. Max): | .015 |
| Locking Shear (psi): | 3000 |
| Temperature Limit: | 400ºF (204ºC) |
| Torque Strength (in. lb) 3/8-16 Steel Cleaned Breakaway: Prevailing: |
300 350 |
| Cure Time with Primer T Fixture (min.): Cure (hr): |
20 6-12 |
| Cure Time without Primer T Fixture (min.): Cure (hr): |
60 24 |
Retainer Adhesive - R35
| Viscosity (cps at 12 rpm): | 1500 |
|---|---|
| Color: | Green |
| Gap Filling (in. Max): | .020 |
| Locking Shear (psi): | 4000 |
| Temperature Limit: | 350ºF (177ºC) |
| Torque Strength (in. lb) 3/8-16 Steel Cleaned Breakaway: Prevailing: |
350 450 |
| Cure Time with Primer T Fixture (min.): Cure (hr): |
10 1-6 |
| Cure Time without Primer T Fixture (min.): Cure (hr): |
20 24 |
Retainer Adhesive - R38
| Viscosity (cps at 12 rpm): | 1500 |
|---|---|
| Color: | Green |
| Gap Filling (in. Max): | .020 |
| Locking Shear (psi): | 4000 |
| Temperature Limit: | 350ºF (177ºC) |
| Torque Strength (in. lb) 3/8-16 Steel Cleaned Breakaway: Prevailing: |
350 450 |
| Cure Time with Primer T Fixture (min.): Cure (hr): |
10 1-6 |
| Cure Time without Primer T Fixture (min.): Cure (hr): |
20 24 |
Retainer Adhesive - R41
| Viscosity (cps at 12 rpm): | 600 |
|---|---|
| Color: | Green |
| Gap Filling (in. Max): | .006 |
| Locking Shear (psi): | 3000 |
| Temperature Limit: | 350ºF (177ºC) |
| Torque Strength (in. lb) 3/8-16 Steel Cleaned Breakaway: Prevailing: |
250 250 |
| Cure Time with Primer T Fixture (min.): Cure (hr): |
20 6-12 |
| Cure Time without Primer T Fixture (min.): Cure (hr): |
20 24 |
Retainer Adhesive - R42
| Viscosity (cps at 12 rpm): | 400 |
|---|---|
| Color: | Green |
| Gap Filling (in. Max): | .010 |
| Locking Shear (psi): | 4000 |
| Temperature Limit: | 350ºF (177ºC) |
| Torque Strength (in. lb) 3/8-16 Steel Cleaned Breakaway: Prevailing: |
350 450 |
| Cure Time with Primer T Fixture (min.): Cure (hr): |
10 1-6 |
| Cure Time without Primer T Fixture (min.): Cure (hr): |
20 24 |
Retainer Adhesive - R48
| Viscosity (cps at 12 rpm): | 500 |
|---|---|
| Color: | Green |
| Gap Filling (in. Max): | .040 |
| Locking Shear (psi): | 4000 |
| Temperature Limit: | 350ºF (177ºC) |
| Torque Strength (in. lb) 3/8-16 Steel Cleaned Breakaway: Prevailing: |
350 450 |
| Cure Time with Primer T Fixture (min.): Cure (hr): |
10 1-6 |
| Cure Time without Primer T Fixture (min.): Cure (hr): |
20 24 |
Retainer Adhesive - R60
| Viscosity (cps at 12 rpm): | 8000 |
|---|---|
| Color: | Green |
| Gap Filling (in. Max): | .015 |
| Locking Shear (psi): | 3000 |
| Temperature Limit: | 350ºF (177ºC) |
| Torque Strength (in. lb) 3/8-16 Steel Cleaned Breakaway: Prevailing: |
--- --- |
| Cure Time with Primer T Fixture (min.): Cure (hr): |
30 6-12 |
| Cure Time without Primer T Fixture (min.): Cure (hr): |
--- --- |
Retainer Adhesive - R80 
| Viscosity (cps at 12 rpm): | 1500 |
|---|---|
| Color: | Green |
| Gap Filling (in. Max): | .010 |
| Locking Shear (psi): | 3000 |
| Temperature Limit: | 350ºF (177ºC) |
| Torque Strength (in. lb) 3/8-16 Steel Cleaned Breakaway: Prevailing: |
300 300 |
| Cure Time with Primer T Fixture (min.): Cure (hr): |
20 6-12 |
| Cure Time without Primer T Fixture (min.): Cure (hr): |
60 24 |
Retainer Adhesive - R82
| Viscosity (cps at 12 rpm): | 1500 |
|---|---|
| Color: | Green |
| Gap Filling (in. Max): | .050 |
| Locking Shear (psi): | 2500 |
| Temperature Limit: | 350ºF (177ºC) |
| Torque Strength (in. lb) 3/8-16 Steel Cleaned Breakaway: Prevailing: |
250 250 |
| Cure Time with Primer T Fixture (min.): Cure (hr): |
20 6-12 |
| Cure Time without Primer T Fixture (min.): Cure (hr): |
60 24 |
Retainer Adhesive - R90
| Viscosity (cps at 12 rpm): | 20 |
|---|---|
| Color: | Green |
| Gap Filling (in. Max): | .003 |
| Locking Shear (psi): | 350 |
| Temperature Limit: | 350ºF (177ºC) |
| Torque Strength (in. lb) 3/8-16 Steel Cleaned Breakaway: Prevailing: |
250 300 |
| Cure Time with Primer T Fixture (min.): Cure (hr): |
20 6-12 |
| Cure Time without Primer T Fixture (min.): Cure (hr): |
60 24 |
Tested per MIL-R-46082 or ASTM D5363.
Shear strength data is generated on 1/2" diameter degreased steel pin and collars per ASTM D4562 or ISO-10123.
Back to Retainer Adhesives Main Page
SAF-T-LOK and SAF-T-EZE are registered trademarks of SAF-T-LOK International Corporation.
All product names, logos, and brands are property of their respective owners. All product names, logos and brands used on this website are for identification purposes only.
© Copyright
All rights reserved.
No part of this site may be copied, reproduced or transmitted in any forms or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAF-T-LOK International Corporation.
Support/Inquiry
