SAF-T-LOK® Anaerobic Adhesives and Sealants reliably lock and seal metal assemblies in a wide range of applications. Anaerobic thread lockers cure to a tough resilient plastic shim in the absence of air and presence of metal. By safely holding components they eliminate loosening and costly breakdowns and damage to equipment from vibration and shock. More
SAF-T-LOK® Instant Bonders (Cyanoacrylate Adhesive) provide exceptional tensile shear strengths within seconds at room temperature. Materials such as metals, plastics, rubber and glass may be bonded with these single part adhesives. More
SAF-T-LOK® Structural Adhesives are designed to satisfy the demands of industry for large gap filling, high impact and shock resistance bonds. They conveniently dispense and cure with activators, UV light source or heat. More
SAF-T-LOK® TPS PTFE Anaerobic Pipe Sealant cures on black iron, galvanized and stainless steel pipe as well as monel and on other inactive metals. TPS is NSF Certified and bears the highest classified pipe sealant rating from the UNDERWRITERS LABORATORY.
SAF-T-EZE® Pipe-Seal is compounded with PTFE to lubricate joint assembly. It is resistant to chemicals and can be used on pipes larger than 3/4" diameter to seal kerosene, LP gas, oil, water, weak caustic acids and low pressure steam. More
SAF-T-LOK® PFS (Polymeric Flange Sealants) replaces most conventional gaskets on metal surfaces. It cures in the absence of air and will not shrink, tear or crack and provides maximum face to face contact of mated parts. PFS Gasket provides an instant seal at low pressures and fully cures in 1 to 8 hours depending upon part configuration and clearance. No retorquing of flange bolts is required. More
SAF-T-LOK® RTV 732 Silicone Sealants offer a high performance product designed for a broad variety of sealing and bonding requirements in original equipment manufacturing or for maintenance needs. More
SAF-T-EZE® Anti-Seize is compounded from fine metallic particles and graphite in a heat resistant lubricant. This combination results in extreme pressure lubricating properties that prevent galling and cold welding, and at the same time resist water wash out or galvanic pitting and corrosion from road salt, acid rain or salt water. More
SAF-T-EZE® offer a range of high performance greases: Extreme Pressure Bearing Lubricant, Extended Life Bearing Lubricant, High Temperature Bearing Lubricant, Di-Electric Silicone Grease and General Purpose Silicone Lubricant. More
Packaged in 16oz cans, SAF-T-EZE offer a range of high quality aerosol products for maintenance applications; Penetrating Oil, Belt Dressing, Gasket Remover, Dry Moly, Silicone Lubricant, Contact Cleaner and Gel Lubricant. More
SAF-T-LOK and SAF-T-EZE are registered trademarks of SAF-T-LOK International Corporation.
All product names, logos, and brands are property of their respective owners. All product names, logos and brands used on this website are for identification purposes only.
All rights reserved.
No part of this site may be copied, reproduced or transmitted in any forms or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAF-T-LOK International Corporation.