Thread Sealing Threaded Joints
Thread Sealing Application Method A-101
This method pertains to the application and assembly of SAF-T-LOK products for the sealing of threaded joints. The procedure is to be used when assembling pipes or other threaded parts, using SAF-T-LOK threadlockers, retainers or thread sealants products.
- Apply the sealing compound to the male threads. When applying to pipes, start two threads from the end of the pipe. Apply to the root of 3 or 4 of the threads.
- Assemble the joints to the required torque. Do not over tighten.
- The assembled parts will be sealed within one hour. A full cure will occur within 24 hours (or 4 hours with Primer).
SAF-T-LOK and SAF-T-EZE are registered trademarks of SAF-T-LOK International Corporation.
All product names, logos, and brands are property of their respective owners. All product names, logos and brands used on this website are for identification purposes only.
All rights reserved.
No part of this site may be copied, reproduced or transmitted in any forms or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAF-T-LOK International Corporation.